All prices are in New Zealand Dollars with 15% GST included.
Overseas customers are not liable for GST, divide NZ$ by 1.15 and then use the below Currency Converter:



 
 
 
Hornady Presses 

 

  Presses:   Accessories - Page 1:
Lock-N-Load Classic Scales & Tricklers
Lock-N-Load Auto Powder Measure & Accessories
Lock-N-Load Case Feeder & Accessories Measuring Devices
50 BMG Press and Accessories Case Trimmer & Accessories
    O.A.L Gauge & Modified Cases
  Dies Page 1: Bullet Comparator & Headspace Gauge
Hornady Die Accessories    
Neck Size & Taper Crimp Dies   Accessories - Page 2:
Custom A-Max Bullet Seating Stems Lubricants
    Bullet Pullers
  Dies Page 2: Case Care Accessories
Series I Dies Hornady Books
Series II Dies Shooting Accessories
Series III Dies    
      Accessories - Page 3:
  Dies Page 3: Primer Accessories
Series IV Specialty Dies Case Tumbler Accessories
Series V Specialty Dies Measuring Devices
Match Grade Dies Neck Turning Tool
50 BMG Dies    

 

Hornady Lock-N-Load Classic Press
     
Hornady Lock-N-Load Classic Press NZ$485 (incl. GST)
Quantity:

Model # 085001

Includes: Primer Catcher and three Lock 'n Load Die Bushings.
Dies and Shell holders sold seperately.

Lock-N-Load™ Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free.The angled frame gives you easier access to your cartridges. Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time. The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times.This precision translates into greater accuracy. =The strong, rigid frame also provides the stability necessary for precision reloading.

  Hornady Lock-N-Load Classic Kit NZ$1,080 (incl. GST)
Quantity:

Model # 085006

Includes: LNL Classic Loader, LNL Powder Measure, Digital Scales, Hornady Handbook, Three LNL Die Bushings, Primer Catcher, Positive Priming System; Handheld Priming Tool, Reloading Block, Deburring Tool, Powder Trickler & Funnel, One shot case lube.

Lock-N-Load™ Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free. The angled frame gives you easier access to your cartridges. Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time. The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times. This precision translates into greater accuracy.

   
Hornady Lock-N-Load Die Bushing (1-Pack) NZ$13.50 (incl. GST)
Quantity:
Model # 044096

Maximize your reloading time with the Lock-N-Load quick change bushing system. The Lock-N-Load reloading system is a patented quick change bushing system that lets you change dies with a simple flick of the wrist. With Lock-N-Load technology in your reloading press, you can stop loading, change dies and start loading another caliber in SECONDS.

  Hornady Lock-N-Load Primer Feed System NZ$115 (incl. GST)
Quantity:

Model # 095210

Includes both large and small primer tubes. Use with our Positive Priming System and there’s no more fumbling with primers— priming is 100% hands off.

     
Hornady Lock-N-Load Press RCBS Conversion Kit NZ$52 (incl. GST)
Quantity:
Model # 044099

Simply insert a Hornady bushing into your RCBS® Rock Chucker or other reloading press using a 1-1/4-12 thread, and you’re ready to take advantage of Hornady’s Lock-N-Load technology. It’s the easiest way to get the most out of your competitive reloading press. The Lock-N-Load Conversion Kit includes three die bushings and one conversion bushing.

  Hornady Lock-N-Load Press Conversion Bushing NZ$27 (incl. GST)
Quantity:
Model # 044095

Simply insert a Hornady bushing into your RCBS® Rock Chucker or other reloading press using a 1-1/4-12 thread, and you’re ready to take advantage of Hornady’s Lock-N-Load technology. It’s the easiest way to get the most out of your competitor's reloading press.

     

 

 

Hornady Lock-N-Load Auto Progressive Press
Hornady Lock-N-Load Auto Progressive EZject Press NZ$1,570 (incl. GST)
Quantity:

Model # 095100

The Lock-N-Load® AP™ with NEW EZject™ system loads at a rate of up to 500 rounds per hour, and features the quickest change-over of any progressive press.

The Lock-N-Load® AP™ is a professional-grade, auto-indexing, 5-station progressive press that features Our patented Lock-N-Load® bushing system as well as a host of other features -- detailed below --that make it much more attractive than other, more expensive presses, such as the Dillon XL650.

  Hornady Lock-N-Load Auto Progressive EZject Conversion Kit NZ$62 (incl. GST)
Quantity:

Model # 095207

Optional EZ-JECT conversion kit for Lock-N-Load AP presses with a serial number of 7000 or greater.

This kit includes: Sub-plate, Allen screws, Spent primer drop tube tool

For more information on this product visit: http://update.hornady.com/support/faqs/reloading

     
Hornady Shell Plates for Pro-jector and Lock-N-Load NZ$103 (incl. GST)
Quantity:

Model #'s 392610-29

Shell plates for Lock-N-Load AP and Pro-Jector™ are available to fit most calibers. Each shell plate will also hold additional calibers with the same case head dimensions. Current shell plates are designed to fit Lock-N-Load® AP™ (both EZ-Ject and wire ejector models) and Pro-Jector™ presses.

  Hornady Large Cartridge Catcher for L-N-L Auto Progressive Press NZ$15 (incl. GST)
Quantity:
Model # 480038

A large capacity catcher comes standard with the L-N-L AP Press. This extra large capacity catcher holds up to 1/3 more completed cartridges.

     
Hornady Lock-N-Load Auto Progressive Case Retainer Spring 1pk NZ$10 (incl. GST)
Quantity:

Model # 392363

The Hornady Lock-N-Load AP Progressive Press Case Retainer Spring is a handy replacement part for your Lock-N-Load AP press. One of the features that makes the Hornady Lock-N-Load AP an exceptional value is the ability to quickly and easily remove and replace a case at any point in the loading process. Be prepared for anything with high quality factory replacement parts that will have your press running like new with minimal downtime if one happens to break.

  Hornady Lock-N-Load Auto Progressive Case Retainer Spring 3pk NZ$20 (incl. GST)
Quantity:

Model # 392370

The Hornady Lock-N-Load AP Progressive Press Case Retainer Spring is a handy replacement part for your Lock-N-Load AP press. One of the features that makes the Hornady Lock-N-Load AP an exceptional value is the ability to quickly and easily remove and replace a case at any point in the loading process. Be prepared for anything with high quality factory replacement parts that will have your press running like new with minimal downtime if one happens to break.

 

Hornady L-N-L Case Feeder and Accessories
     
Hornady Lock-N-Load Case Feeder 220 Volt NZ$921 (incl. GST)
Quantity:
Model # 095302
The Hornady Lock-N-Load AP™ is now automatic! With the highest torque motor in the industry and an extra large case bowl, it can feed up to four times as many cases as other case feeders. Reload hundreds of rounds per hour! Adapts to your existing AP press and feeds every cartridge. Changeovers are quick and simple, and the case feeder easily disengages. This model for 220 volt 50 hz electrical systems (Europe etc)
  Hornady Lock-N-Load Subplate APCF Retrofit Kit NZ$209 (incl. GST)

Quantity:

Model # 398309

The Hornady L-N-L Automatic Case Feeder will work with your present L-N-L AP once you install this subplate.

     
Hornady Case Feeder Plate   NZ$82 (incl. GST)
Size: Quantity:
Model # 095310-16

Case Feeder Plate comes in:
Small Pistol
Large Pistol
Small Rifle
Large Rifle

 

Hornady Dust Cover for Lock-N-Load Case Feeder NZ$72 (incl. GST)

Quantity:

Model # 095203

Dust covers are the perfect accessory to keep reloading equipment clean and working properly. They also help keep make sure a reloading bench stays neat and orderly.

 

Hornady 50 BMG Press & Accessories
Hornady 50 BMG Single Stage Press NZ$1,180 (incl. GST)
Quantity:

Model # 085004

The Hornady Lock-N-Load 50 BMG Single Stage Press is a great press for the serious 50 BMG reloader. The press features Hornady's Lock-N-Load technology in the ram. This allows you to prime your cases with the shellholder on the top plate, and then quickly switch back to the die using the Lock-N-Load bushings. The press features extra long clearance, and enough mechanical advantage to get the job done right every time. The presses solid construction will ensure years of reliable use. 50 BMG Dies and shellholder sold separately.

  Hornady 50 BMG Single Stage Press Kit NZ$1,949 (incl. GST)
Quantity:

Model # 085005

Lock-N-Load 50 CAL BMG Kit includes a Lock-N-Load™ 50 CAL BMG press and Hornady Custom Grade New Dimension 50 Cal. Die Set, created from select steel and heat-treated for durability and a lifetime of reloading. Dies are guaranteed never to break or wear out from normal use.

Includes a 50 BMG Press, Shell Holder, two Lock-N-Load adapter bushings, Ram Prime system and a 50 BMG Die set.

     
Hornady 50 BMG Powder Measure NZ$323 (incl. GST)
Quantity:

Model # 050127

Includes an oversized hopper tube, 265 grain capacity metering unit and a see-through extended drop tube so you can confirm a complete powder drop into the case.

  Hornady 50 BMG Primer Seating Gauge NZ$273 (incl. GST)
Quantity:

Model # 050150

Consistently seating primers is now a science with the Hornady BMG Seating Gauge. This precision instrument uses a dial indicator to measure the depth of each primer pocket and the height of each primer. That allows you to consistently seat the primer with the anvil just touching the bottom of the primer pocket every single time — letting you take full advantage of firing pin energy and get a truly consistent result.

     
Hornady 50 BMG High Capacity Metering Kit 80/265 NZ$190 (incl. GST)
Quantity:

Model # 050126

Load up to 265 grains of powder in a single drop with Hornady’s High Capacity Metering Kit. The kit’s two metering units have capacities of 80 to 180 grains and 165 to 265 grains of powder, and come with the clear drop tube and large hopper tube. The clear drop tube visually ensures a complete powder drop. An extended hopper tube is also included so you can reload more rounds between refills of powder. Fits Hornady Lock-N-Load Powder Measure.

  Hornady 50 BMG Shell Head Adapter NZ$85 (incl. GST)
Quantity:

Model # 392172

Reload any caliber ammo on your .50 BMG Press with standard shell holders. Especially useful for shooters reloading long cartridges which require a very long stroke.

     
Hornady 50 BMG 2 Die Set NZ$752 (incl. GST)
Quantity:

Model # 544460

Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade New Dimension 50 Cal. Die Set is so well-crafted, it’s guaranteed never to break or wear out from normal use.

  Hornady 50 BMG Full Length Die NZ$414 (incl. GST)
Quantity:

Model # 044589

Custom Grade New Dimension Full Length Sizer Dies feature polished elliptical expanders that reduce or eliminate neck stretch. The hardened steel decapping pin won't break even when depriming cases with crimped primer pockets. They feature a Zip Spindle with a series of light threads cut on the spindle and spindle collet to eliminate slippage and make it easier to tighten the spindle lock when making adjustments. Shellholder sold separately.

     
Hornady 50 BMG Lock Ring Assembly NZ$46 (incl. GST)
Quantity:

Model # 393341
Thread: 1-1/2"-12 Thread

The Hornady Die Lock Ring Assembly 50 BMG is a great replacement item for your Hornady 50 BMG New Dimension die set. The lock ring allows you to make precise die adjustments, and will not harm the threads on your die. The lock ring clamps around the die to provide constant pressure across the threads to hold the die in place during use. The Die Lock Ring has Wrench Flats on the sides for easy installation and removal.

  Hornady 50 BMG Chamfer and Deburring Tool NZ$139 (incl. GST)
Quantity:

Model # 050153

Extra large diameter. Precision ground and made from all tool steel. The ultimate in 50 cal. accessories.
The Hornady Chamfer and Deburring tool is the ideal tool to chamfer the inside and deburr the outside edge of cartridge cases when they are new or after they have been trimmed. This crucial step removes slight imperfections from the case mouth causing increased seating consistency and reduces the chance of shaving material off of a bullet when it is being seated.

     
Hornady 50 BMG Shell Holder NZ$85 (incl. GST)
Quantity:

Model # 390585

Our Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.

   

 

                

Copyright © 1998-2023 Hunting and Outdoor Supplies.  All Rights Reserved.
Updated January 2025