Model # 050085

The Hornady Universal Depriming and Decapping Die is ideal for the reloader who wants to quickly and efficiently deprime or decap brass at one time. Hornady’s new Universal Depriming and Decapping Die is designed for decapping cartridge cases prior to sizing them. Its tough decapping rod has no problems decapping even tough crimped military cartridge cases. Hornady says this die will work with brass cases from the 223 Remington and up. NOT for use with Berdan primed cases.

Hornady MicroJust Seating Stem NZ$89 (incl. GST)

Model # 044090

Hornady Shell Holders NZ$14

Please note: Write caliber of shell holder in comments on order form.

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.). Hornady steel shell holders also fit most other brands of reloading presses.

Hornady Shell Plates for Pro-jector and Lock-N-Load NZ$87 (incl. GST)

Model #'s 392610-29

Shell plates for Lock-N-Load AP and Pro-Jector™ are available to fit most calibers. Each shell plate will also hold additional calibers with the same case head dimensions. Current shell plates are designed to fit Lock-N-Load® AP™ (both EZ-Ject and wire ejector models) and Pro-Jector™ presses.

Hornady Die Locking Ring Wrench NZ$19 (incl. GST)

Model # 396490

Fits the flats of the New Dimension dies spindle assembly, lock rings and die body. The Hornady Die Locking Ring Wrench is a great accessory for easily making adjustments to Hornady CGND dies and lock rings. This wrench has precision cuts to fit the flats on the locking ring, die spindle assembly, and die body on the Hornady Custom Grade New Dimension dies.

Hornady Custom Grade A-Max Bullet Seating Stem NZ$30

Model #'s 397100-09

The Hornady Custom Grade New Dimension Die Seater Stem is the perfect addition for the reloader utilizing specialty Hornady bullets like the popular FTX bullet or the super accurate A-Max bullet. Simply remove the standard seating stem from your Custom Grade New Dimension Seating Die and install the new stem. The die stems will only work with Hornady Custom Grade New Dimension Seating Dies, and caliber listed in description.

Hornady New Style Large Decapping Pin NZ$4 (incl. GST)

Model # 390222

The Hornady Custom Grade New Dimension Die Decapping Pin is a necessary replacement item to have on hand for your CGND die set. Through normal wear and tear, decapping pins can get bent or broken. The large pin fits 243 caliber through 45 caliber dies.

Hornady Original Decapping Pins - Set of 5 Pins Included NZ$2.50 (incl. GST)

Model #'s 060008-9
* .22 thru .264 dies use small pin. (Size: .062" x 687".)
* .270 thru .45 use large pin. (Size: .071" x .875".)

The Hornady Durachrome Die Decapping Pins are great for replacing your broken or worn out pins in your Hornady Durachrome dies. These decapping pins will not fit the New Dimension dies. 5 decapping pins included.

Hornady Spare Large Die Box NZ$12 (incl. GST)

Model # 544600

The Hornady Large Die Box is a perfect addition to the Hornady line of reloading gun accessories. This tool is made of strong, durable materials that is sure to last as long as you keep your reloading passion. The Hornady Die Holder is just what you need. We offer the best price and the best quality around. There is nothing stopping you from getting your Hornady Large Die Box today!

Hornady Sure-Loc Lock Ring NZ$10

Model # 044000

Hornady Sure-Loc Lock Rings - 6pack NZ$47

Model # 044606

The Hornady Sure-Loc Die Locking Ring is a terrific addition to any 7/8"-14 threaded die. The split ring design ensures the tightened screw never touches the threads and cannot damage the die. The Locking Ring applies constant pressure across the threads to hold the ring in place, so your die settings remain the same when switching between calibers. The Sure-Loc ring features wrench flats that allow easy removal of the lock ring without damage.

Model # 043402
Fits: Any Caliber Hornady New Dimension Straight Wall and Pistol Cartridges
Function: Converts older dies to the new Zip Spindle design
Material: Steel
Kit consists of a threaded spindle and threaded spindle collet.

About the Zip Spindle Kits - The Hornady Custom Grade New Dimension Die Zip Spindle Kit is the ideal kit for updating your older Hornady Sizing dies to utilize the new threaded spindle design. The Zip Spindle has a series of light threads cut on the spindle and collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. This kit includes a new threaded spindle and a threaded spindle collet. To install, remove the non-threaded spindle, collet, and expander ball from the existing die. Re-attach the existing expander ball to the new spindle, and install the threaded spindle and threaded collet. If the spindle on the expander die is already threaded, then this kit is not necessary.

Model # 043401
Fits: 17 and 20 Caliber Hornady New Dimension Sizer Dies
Function: Converts older dies to the new Zip Spindle design
Material: Steel
Kit consists of a threaded spindle and threaded spindle collet.

Model # 043400
Fits: Any Caliber Hornady New Dimension Sizer Dies (except 17 and 20 Caliber)
Function: Converts older dies to the new Zip Spindle design
Material: Steel
Kit consists of a threaded spindle and threaded spindle collet.

Model # 398567

Hornady Custom Grade New Dimension Die Threaded Zip Spindle Rod

Hornady Neck Size Dies All NZ$88 (incl. GST)

Neck sizing with this die can eliminate problems of excessive head space, and align the bullet perfectly with the bore, resulting in better accuracy and longer case life. Should only be used for bolt-action rifle cases. Auto-loading, lever and pump action rifles usually require full-length resizing.

Hornady Taper Crimp Dies - 38, 9mm, 40 S&W, 10mm & 45 ACP Calibers NZ$45

Model # 044170-2
For Calibers: 38 cal / 9mm, 40 S&W / 10mm, and 45 ACP

This die removes the flare from the case mouth and crimps case mouth around the bullet while maintaining a sharp edge for proper head-space. Improves feeding of reloaded cases in semi-automatic handguns.

Hornady Taper Crimp Dies - 400 Corbon & 460 S&W Calibers NZ$64

This die removes the flare from the case mouth and crimps case mouth around the bullet while maintaining a sharp edge for proper head-space. Improves feeding of reloaded cases in semi-automatic handguns.

Hornady Taper Crimp Dies - 450 Bushmaster, 454 Casull, 475 Linebaugh and 500 S&W Calibers NZ$64

Model # 044176-702
For Calibers: 450 Bushmaster, 454 Casull, 475 Linebaugh, 500 S&W Mag

This die removes the flare from the case mouth and crimps case mouth around the bullet while maintaining a sharp edge for proper head-space. Improves feeding of reloaded cases in semi-automatic handguns.

Hornady Custom A-Max Bullet Seating Stem NZ$30

Model # 397100-7
For Calibers: 22 cal, 30 cal (155gr-178gr), 30 cal (208gr), 6.5mm, 6mm, 7mm

This replacement seating stem is the perfect addition for the reloader utilizing specialty Hornady bullets like the popular FTX bullet or the supper accurate A-Max bullet. Just take out the seating stem that was installed in the Custom Grade New Dimension Seating Die and install this stem. These stems are designed for use with the caliber and bullet type listed in the description only. Additionally these stems will only work with Hornady Custom Grade New Dimension Seating Dies.