Timney Trigger Ruger 77 - Tang Safety Model NZ$311 (incl. GST)

Model # 601

Lightweight alloy housing. Working parts are machined, hardened, ground, and polished, Tired of that heavy creepy trigger? The Model 77 will give you a good crisp 1.5 - 3.5 pound pull.

Timney Trigger Ruger 77 Nickel Plated - Tang Safety Model NZ$284 (incl. GST)

Model # 601-16

Lightweight alloy housing. Working parts are machined, hardened, ground, and polished, Tired of that heavy creepy trigger? The Model 77 will give you a good crisp 1.5 - 3.5 pound pull.

Timney Trigger Ruger M77 MKII - Not for VT Model NZ$320 (incl. GST)

Model # 1100

Take the creep out of your trigger and dial in the pull weight you want. Trigger is constructed of 440-C stainless steel. Engagement surfaces are precision machined and polished. The sear is EDM cut, heat treated and tempered nickel plated steel. Fits new Hawkeye rifles with the LC6 trigger, wont fit VT rifles (factory 2 stage triggers)

Timney Trigger Ruger M77 MKII Left Hand - Not for VT Model NZ$320 (incl. GST)

Model # 1102

Lightweight alloy housing. Working parts are machined, hardened, ground, and polished, Tired of that heavy creepy trigger? The Model 77 will give you a good crisp 1.5 - 3.5 pound pull.

Timney Trigger Ruger 77/22 - Sear and Spring Only NZ$129 (incl. GST)

Model # 7722
Also Fits 77/17, 77/40 and 77/50

This sear and spring kit will make an amazing difference in the feel of your rifle's trigger. You'll have a clean break of around 1.5 - 2 pounds. Takes a few minutes to fit the sear to the rifle and you may have to do a bit of filing.

Timney Trigger Ruger 10/22 - Black with Black Shoe NZ$570 (incl. GST)

Model # 1022-1C

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Black with Red Shoe NZ$570 (incl. GST)

Model # 1022-2C

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Black with Blue Shoe NZ$570 (incl. GST)

Model # 1022-3C

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Black with Gold Shoe NZ$570 (incl. GST)

Model # 1022-4C

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Black with Green Shoe NZ$570 (incl. GST)

Model # 1022-5C

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Black with Silver Shoe NZ$570 (incl. GST)

Model # 1022-6C

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Silver with Black Shoe NZ$570 (incl. GST)

Model # 1022-1C-16

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Silver with Red Shoe NZ$570 (incl. GST)

Model # 1022-2C-16

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Silver with Blue Shoe NZ$570 (incl. GST)

Model # 1022-3C-16

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Silver with Gold Shoe NZ$570 (incl. GST)

Model # 1022-4C-16

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Silver with Green Shoe NZ$570 (incl. GST)

Model # 1022-5C-16

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Ruger 10/22 - Silver with Silver Shoe NZ$570 (incl. GST)

Model # 1022-6C-16

The new Timney 10/22 trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger 10-22. Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger 10-22 is a complete action replacement.

Timney Trigger Sako A Actions - L461, L579, L61 NZ$272 (incl. GST)

Model # 621

Fits Sako "A" Actions - L461, L579, L61. Adjusts for a weight of pull from 1.5 to 3.5lbs, and will also adjust the sear engagement and over-travel.

Timney Trigger Sako A Actions Nickel Plated NZ$290 (incl. GST)

Model # 621-16

Fits Sako "A" Actions - L461, L579, L61. Adjusts for a weight of pull from 1.5 to 3.5lbs, and will also adjust the sear engagement and over-travel.

Timney Trigger Savage 110 NZ$229 (incl. GST)

Model # 631
For Models 10, 11, 12, 16, 110, 111, 112, 114, 116 & 210

Provides the shooter with time-proven Timney quality and the fabled breaking a glass rod crisp trigger pull. The model 631 is designed to fit all Savage bolt-action center fire rifles manufactured since 1977 (excluding those rifles equipped with the AccuTriggerTM ). The trigger pull weight can be adjusted from 1.5 - 4 pounds. In addition it is fully adjustable for sear engagement (creep) and over-travel.

Timney Trigger Savage 110 Nickel Plated NZ$250 (incl. GST)

Model # 635
For Models 10, 11, 12, 16, 110, 111, 112, 114, 116 & 210

Provides the shooter with time-proven Timney quality and the fabled breaking a glass rod crisp trigger pull. The model 631 is designed to fit all Savage bolt-action center fire rifles manufactured since 1977 (excluding those rifles equipped with the AccuTriggerTM ). The trigger pull weight can be adjusted from 1.5 - 4 pounds. In addition it is fully adjustable for sear engagement (creep) and over-travel.

Timney Trigger Savage Axis/Edge NZ$229 (incl. GST)

Model # 633

The new Timney Axis/Edge trigger (Model 633) is machined from case-hardened solid steel and is fully adjustable for pull weight, sear engagement (creep) and over-travel. The trigger's pull weight can be adjusted from 1.5 - 4 pounds.

Timney Trigger Savage Axis/Edge Nickel Plated NZ$250 (incl. GST)

Model # 633-16

The new Timney Axis/Edge trigger (Model 633) is machined from case-hardened solid steel and is fully adjustable for pull weight, sear engagement (creep) and over-travel. The trigger's pull weight can be adjusted from 1.5 - 4 pounds.

Timney Trigger Savage Accutrigger NZ$229 (incl. GST)

Model # 638

The new Timney Savage for the Accutrigger (Model 638 and NP 638-16) is machined from case-hardened solid steel and is fully adjustable for pull weight, sear engagement (creep) and over-travel. The trigger's pull weight can be adjusted from 1.5 - 4 pounds.

Timney Trigger Savage Accutrigger Nickel Plated NZ$250 (incl. GST)

Model # 638-16

The new Timney Savage for the Accutrigger (Model 638 and NP 638-16) is machined from case-hardened solid steel and is fully adjustable for pull weight, sear engagement (creep) and over-travel. The trigger's pull weight can be adjusted from 1.5 - 4 pounds.

Timney Trigger SCAR 16S - 3lb Solid NZ$707 (incl. GST)

Model # 690S
Fits the P-16 and P-17
3 Pounds Non Adjustable

The Timney SCAR trigger is a self-contained, 100% drop-in unit ready to install in an SCAR rifles for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting required. Pull weight is factory set at 3 pounds. Lightweight, 6061 T6 alloy housing is anodized for superior durability.

Timney Trigger SCAR 17S - 3.5lb Solid NZ$670 (incl. GST)

Model # 691S
Fits SCAR 17s
3.5 Pounds Non Adjustable

The Timney SCAR trigger is a self-contained, 100% drop-in unit ready to install in an SCAR rifles for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting required. Pull weight is factory set at 3.5 lbs and has a stronger spring for the 308 ammo. Lightweight, 6061 T6 alloy housing is anodized for superior durability.

Timney Trigger Mauser Speedlock Springs NZ$27 (incl. GST)

Model # 701

Replacement firing pin spring reduces locktime by approximately 15% and eliminates misfires. Improves the firing pin fall and helps eliminate misfires.

Timney Trigger Springfield Speedlock Springs NZ$27 (incl. GST)

Model # 702

Replacement firing pin spring reduces locktime by approximately 15% and eliminates misfires. Improves the firing pin fall and helps eliminate misfires.

Timney Trigger Enfield Speedlock Springs NZ$27 (incl. GST)

Model # 703

Replacement firing pin spring reduces locktime by approximately 15% and eliminates misfires. Improves the firing pin fall and helps eliminate misfires.

Timney Trigger Springfield Sportsman S03-A3 NZ$129 (incl. GST)

Model # 109

This trigger was created for the Bench-rest and long distance varmint shooters. With a knurled trigger bar, it is adjustable for length of pull. It can also be rotated from side to side to put fire control right where you decide. Adjustable from 4 to 10 ounces.

Timney Trigger Springfield Sportsman SM2-22 NZ$129 (incl. GST)

Model # 113

This trigger was created for the Bench-rest and long distance varmint shooters. With a knurled trigger bar, it is adjustable for length of pull. It can also be rotated from side to side to put fire control right where you decide. Adjustable from 4 to 10 ounces.

Timney Trigger Springfield Featherweight S03-A3 NZ$185 (incl. GST)

Model # 209

Fits same rifles as the Springfield Sportsman trigger. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required. New for 2008 the trigger is 3/16" wide, eliminating the need to widen the trigger slot on your trigger guard.

Timney Trigger Springfield Featherweight SM2-22 NZ$185 (incl. GST)

Model # 210

Fits same rifles as the Springfield Sportsman trigger. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required. New for 2008 the trigger is 3/16" wide, eliminating the need to widen the trigger slot on your trigger guard.

Timney Trigger Springfield Featherweight Deluxe S03-A3 NZ$233 (incl. GST)

Model # 310

This trigger was created for the Bench-rest and long distance varmint shooters. With a knurled trigger bar, it is adjustable for length of pull. It can also be rotated from side to side to put fire control right where you decide. Adjustable from 4 to 10 ounces.

Timney Trigger Springfield Speedlock Springs NZ$27 (incl. GST)

Model # 702

Replacement firing pin spring reduces locktime by approximately 15% and eliminates misfires. Improves the firing pin fall and helps eliminate misfires.

Timney Trigger Weatherby Vanguard, Howa1500 - WV1500 NZ$250 (incl. GST)

Model # 611

Features true Timney quality and an exclusive three position safety. Fits the Weatherby Vanguard, Mossberg 1500, Smith & Wesson 1500, and HOWA 1500 actions. It also fits the Weatherby Vanguard Series two.

Timney Trigger Weatherby Vanguard, Howa1500 - WV1500 Nickel Plated NZ$272 (incl. GST)

Model # 611-16

Features true Timney quality and an exclusive three position safety. Fits the Weatherby Vanguard, Mossberg 1500, Smith & Wesson 1500, and HOWA 1500 actions. It also fits the Weatherby Vanguard Series two.

Timney Trigger Weatherby Mark V-American NZ$305 (incl. GST)

Model # 651

We have designed separate triggers for the Weatherby Mark V. One for American and Japanese made models and one for German made models featuring the safety on the bolt. The trigger pull weight can be adjusted from 1 - 4 pounds. and is fully adjustable for sear engagement.

Timney Trigger Weatherby Mark V- German NZ$305 (incl. GST)

Model # 652

We have designed separate triggers for the Weatherby Mark V. One for American and Japanese made models and one for German made models featuring the safety on the bolt. The trigger pull weight can be adjusted from 1 - 4 pounds. and is fully adjustable for sear engagement.

Timney Trigger Winchester WIN 70 NZ$260 (incl. GST)

Model # 401

The model 401 brings Timney Trigger quality to the fabled Model 70 (pre and post 64). The 401 is adaptable to the Model 54 by building up the cocking piece to Model 70 contour. Trigger pull weight can be adjusted from 1 - 3 pounds. This trigger has been recently redesigned to make it incredibly easy to install.

Timney Trigger Winchester WIN 70 Nickel Plated NZ$280 (incl. GST)

Model # 416

The model 416 brings Timney Trigger quality to the fabled Model 70 (pre and post 64). The 401 is adaptable to the Model 54 by building up the cocking piece to Model 70 contour. Trigger pull weight can be adjusted from 1 - 3 pounds. This trigger has been recently redesigned to make it incredibly easy to install.

Timney Trigger Winchester WIN 70 MOA NZ$260 (incl. GST)

Model # 402

This self-contained, 100% drop-in unit is ready to install in your Winchester Model 70 rifle with the MOA trigger. The trigger features an exceptionally smooth, crisp, single-stage trigger pull and requires no gunsmithing or fitting. Just like all Timney bolt action rifle triggers the new Winchester MOA replacement is fully adjustable for Creep, follow through and pull weight.

Timney Trigger Winchester WIN 70 MOA Nickel Plated NZ$280 (incl. GST)

Model # 402-16

This self-contained, 100% drop-in unit is ready to install in your Winchester Model 70 rifle with the MOA trigger. The trigger features an exceptionally smooth, crisp, single-stage trigger pull and requires no gunsmithing or fitting. Just like all Timney bolt action rifle triggers the new Winchester MOA replacement is fully adjustable for Creep, follow through and pull weight.