Timney Trigger Archery Hook Trigger - Black NZ$234 (incl. GST)

Model # 2202

The Timney Archery Trigger features an innovative Length of Pull Adjustment System that allows the shooter 1 3/4 inches of adjustment by using 1/4 inch ball increments. The jaws and trigger are constructed of heat treated steel and housed in, 6061 T6 alloy, designed for a lifetime in the field. Timney Triggers includes a lifetime warranty on all of their products, and each trigger is proudly Made in the USA.

Timney Trigger Archery Trigger Double Caliper - Black NZ$234 (incl. GST)

Model # 2201

The Timney Archery Trigger features an innovative Length of Pull Adjustment System that allows the shooter 1 3/4 inches of adjustment by using 1/4 inch ball increments. The jaws and trigger are constructed of heat treated steel and housed in, 6061 T6 alloy, designed for a lifetime in the field. Timney Triggers includes a lifetime warranty on all of their products, and each trigger is proudly Made in the USA.

Timney Trigger Arisaka JAP 6.5 (Model 38) NZ$239 (incl. GST)

Model # 312

Will fit the Japanese Arisaka 6.5, includes a trigger blocking safety, fully adjustable for weight of pull between 2 and 4 lbs., and can be set for sear engagement (creep) and overtravel. Some inletting required.

Timney Trigger Arisaka JAP 7.7 (Model 99) NZ$239 (incl. GST)

Model # 313

Will fit the Japanese Arisaka 7.7, includes a trigger blocking safety, fully adjustable for weight of pull between 2 and 4 lbs., and can be set for sear engagement (creep) and overtravel. Some inletting required.

Timney Trigger Browning A-Bolt Spring Kit NZ$75 (incl. GST)

Model # 602

Our Browning A-Bolt trigger pull spring set includes two springs. The first will give a pull of 1.5-2 pounds, the second delivers a range of 2-3 pounds.

Timney Trigger CZ 452L - Fits 17 Mach II and .22 Long Rifle NZ$224 (incl. GST)

Model # 452L

452 L fits .22 long rifle and .17 Mach II. Adjustable from 2- 3.5lbs. The sear engagement is also adjustable and the over-travel is mechanically limited. Each trigger is calibrated to approximately 2 lb., with virtually no creep. Stock inletting required.

Timney Trigger CZ 452M - Fits 17HMR & .22Mag NZ$224(incl. GST)

Model # 452M

452 M will fit the .17 HMR & .22 Mag. Adjustable from 2- 3.5lbs. The sear engagement is also adjustable and the over-travel is mechanically limited. Each trigger is calibrated to approximately 2 lb., with virtually no creep. Stock inletting required.

Timney Trigger CZ 455 NZ$224(incl. GST)

Model # 455

Fits the CZ455, Adjustable from 2- 4lbs. The sear engagement is also adjustable and the over-travel is mechanically limited. Each trigger is calibrated to approximately 3 lb., with virtually no creep. Stock in-letting required.

Timney Trigger CZ 550 - Fits Most Centrefires NZ$224(incl. GST)

Model # 550

Eliminates the set trigger to give a mechanically simplified, accurate pull from 1 � 3 pounds. The CZ 550 fits all standard centerfire calibers. The CZ 550m fits magnum centerfire CZ rifles.

Timney Trigger CZ 550M - Fits Large Magnums NZ$224(incl. GST)

Model # 550M

Eliminates the set trigger to give a mechanically simplified, accurate pull from 1 - 3 pounds. The CZ 550 fits all standard centerfire calibers. The CZ 550m fits magnum centerfire CZ rifles.

Timney Trigger Howa 1500 with Safety - Black NZ$385 (incl. GST)

Model # 609

Lightweight alloy housing. Working parts are EDM machined, hardened, and polished. This trigger is adjustable for pull weight, creep, and backlash. Minor fitting may be required. Instructions included.

Timney Trigger Howa 1500 with Safety - Nickel Plated NZ$410 (incl. GST)

Model # 609-16

Lightweight alloy housing. Working parts are EDM machined, hardened, and polished. This trigger is adjustable for pull weight, creep, and backlash. Minor fitting may be required. Instructions included.

Timney Trigger Enfield Sportsman E1-4 (5 Shot Mag) NZ$129

Model # 110

Fits most bolt-action rifles built on Mauser, Springfield, or Enfield type actions. Fully adjustable, 2-4 pounds trigger pull weight. Light weight alloy housing. Machined and hardened steel working surfaces. Some stock inletting required.

Timney Trigger Enfield Sportsman E1-5 (6 Shot Mag) NZ$129 (incl. GST)

Model # 111

Fits most bolt-action rifles built on Mauser, Springfield, or Enfield type actions. Fully adjustable, 2-4 pounds trigger pull weight. Light weight alloy housing. Machined and hardened steel working surfaces. Some stock inletting required.

Timney Trigger Mauser Featherweight M98FN NZ$187

Model # 201

Fits same rifles as the Sportsman, except the Enfield. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required.

Timney Trigger Mauser Featherweight M98K NZ$187

Model # 202

Fits same rifles as the Sportsman, except the Enfield. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required.

Timney Trigger Mauser Featherweight M95-6 NZ$187

Model # 203

Fits same rifles as the Sportsman, except the Enfield. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required.

Timney Trigger Mauser Featherweight M91-4 NZ$187

Model # 204

Fits same rifles as the Sportsman, except the Enfield. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required.

Timney Trigger Mauser Featherweight M91-4K NZ$187

Model # 205

Fits same rifles as the Sportsman, except the Enfield. Light weight alloy housing. Pull weight adjusts between 1 - 3 pounds. Working surfaces are EDM machined, hardened and polished. Some stock inletting required.

Timney Trigger Mauser Featherweight Deluxe M98FN NZ$234

Model # 301

Features a trigger blocking side safety, making it suitable for most bolt-action rifles with Mauser and Springfield actions as well as Husqvarna and Mark X. Assembled on a lightweight alloy housing. Pull weight adjusts between 1.5 - 4 lbs. Some stock inletting required.

Timney Trigger Mauser Featherweight Deluxe M98K (K98 Mauser) NZ$234

Model # 302

Features a trigger blocking side safety, making it suitable for most bolt-action rifles with Mauser and Springfield actions as well as Husqvarna and Mark X. Assembled on a lightweight alloy housing. Pull weight adjusts between 1.5 - 4 lbs. Some stock inletting required.

Timney Trigger Mauser Featherweight Deluxe M95-6 (M96 Swedish Mauser) NZ$234

Model # 303

Features a trigger blocking side safety, making it suitable for most bolt-action rifles with Mauser and Springfield actions as well as Husqvarna and Mark X. Assembled on a lightweight alloy housing. Pull weight adjusts between 1.5 - 4 lbs. Some stock inletting required.

Timney Trigger Mauser Featherweight Deluxe M91-4 NZ$234

Model # 305

Features a trigger blocking side safety, making it suitable for most bolt-action rifles with Mauser and Springfield actions as well as Husqvarna and Mark X. Assembled on a lightweight alloy housing. Pull weight adjusts between 1.5 - 4 lbs. Some stock inletting required.

Timney Trigger Mauser Featherweight Deluxe M91-4K NZ$234

Model # 306

Features a trigger blocking side safety, making it suitable for most bolt-action rifles with Mauser and Springfield actions as well as Husqvarna and Mark X. Assembled on a lightweight alloy housing. Pull weight adjusts between 1.5 - 4 lbs. Some stock inletting required.

Timney Trigger Mauser Featherweight Deluxe Mini NZ$234

Model # 315

Timney Featherweight Deluxe Trigger Remington 799, Mini Mauser With Safety adjustable from 1.5 to 4 lb. Timney Featherweight Triggers are precision machined and hand-fitted to provide a crisp trigger pull. They feature a lightweight alloy housing with machined and hardened steel working surfaces. Adjustable for creep and overtravel. The Featherweight Deluxe also features a safety.

Timney Trigger Mauser Safety - Low Profile M-98 LPS (K98) NZ$88 (incl. GST)

Model # 1001

Designed to make the bolt safety on your Mauser much more convenient, the Timney Low Profile Safety performs well with or without a scope and is a fine addition to any rifle. The safety functions in the same manner as the original with one important difference: it swings in a 70-degree arc, making it much easier to apply the safety quickly.

Timney Trigger Mauser Safety - Low Profile M-98 LPS (K98) Nickel Plated NZ$111 (incl. GST)

Model # 1001-16

Designed to make the bolt safety on your Mauser much more convenient, the Timney Low Profile Safety performs well with or without a scope and is a fine addition to any rifle. The safety functions in the same manner as the original with one important difference: it swings in a 70-degree arc, making it much easier to apply the safety quickly.

Timney Trigger Mauser Safety - Low Profile M-95-6 LPS (M96) NZ$88 (incl. GST)

Model # 1002

Designed to make the bolt safety on your Mauser much more convenient, the Timney Low Profile Safety performs well with or without a scope and is a fine addition to any rifle. The safety functions in the same manner as the original with one important difference: it swings in a 70-degree arc, making it much easier to apply the safety quickly.

Timney Trigger Mauser Safety - Low ProfileM-95-6 LPS (M96) Nickel Plated NZ$111(incl. GST)

Model # 1002-16

Designed to make the bolt safety on your Mauser much more convenient, the Timney Low Profile Safety performs well with or without a scope and is a fine addition to any rifle. The safety functions in the same manner as the original with one important difference: it swings in a 70-degree arc, making it much easier to apply the safety quickly.

Timney Trigger Mauser Featherweight Deluxe Mosin-Nagant with Safety NZ$234 (incl. GST)

Model # 307

Timney has been asking shooters and hunters, "What trigger would you like us to build next?" The response has been incredible and thanks to our customers, some awesome triggers have been built. The Mosin Nagant, our first "Customer's Choice" trigger is now available for purchase. This trigger features a trigger blocking side safety and an adjustable trigger pull weight from 1-1/2 to 4 lbs. The internal components are heat treated and come assembled in a lightweight alloy housing.

Timney Trigger Mauser Speedlock Springs NZ$27 (incl. GST)

Model # 701

Replacement firing pin spring reduces locktime by approximately 15% and eliminates misfires. Improves the firing pin fall and helps eliminate misfires.

Timney Trigger Remington REM 600 with ULA Safety NZ$344 (incl. GST)

Model # 500

Using the same innovative design as our Remington 700 with safety trigger, this is manufactured to drop right into your Remington 600 rifle. When in the safe position the trigger is locked in place, preventing movement. The safety is two position, allowing the bolt to be opened (and he rifle to be unloaded) in the safe position.

Timney Trigger Remington 870 Trigger Fix NZ$224 (incl. GST)

Model # 870

The Timney Remington 700 Straight Trigger offers the most trouble-free installation imaginable with no screws, drilling, or tapping required. By simply removing existing pins, replacing trigger, and inserting new pins anyone can replace a trigger on a Remington 700. The Straight Trigger features a Timney designed safety that blocks the trigger not the sear, which is standard on all Timney Remington 700 replacement triggers.

Timney Trigger Remington REM 788 NZ$344 (incl. GST)

Model # 788

The Remington 788 has long been considered the best shooting rifle for the money, the only thing holding it back has been its trigger. Even though the 788 has been discontinued we still sell hundreds of these triggers. Adjustable from 1.5 to 3.5 lbs, the trigger comes with safety and bolt stop attached.

Timney Trigger Remington REM 7 NZ$344 (incl. GST)

Model # 501

Fully adjustable. Uses safety and bolt-stop from your present trigger. Brings trigger control you never thought possible to your Remington 7. Adjustable from 1 1/2 to 4 pounds. Our trigger will not work if you are tring to replace the X-mark Pro Trigger on the Model Rem 7.

Timney Trigger Elite Hunter Remington REM 700 Right Hand with Safety in Black - Also Fits 721 and 722 NZ$344 (incl. GST)

Model # 510-V2

The next evolution of accuracy in a drop-in, replacement trigger for the iconic Remington Model 700. Timney engineered every component of the new Elite Hunter to elevate your accuracy. Since it was founded in 1946, Timney Triggers has built a reputation based on the quality of its products. Because of the precision machining and workmanship that goes into each Timney product they are The World's Finest Triggers.™

Timney Trigger Remington REM 700 Left Hand with ULA Safety NZ$280 (incl. GST)

Model # 511

The 511 comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. The Model 511 will bring a whole new realm of accuracy to your Remington rifle. Each trigger is geometrically identical with tolerances less than .0005”. adjustable from 1.5 to 4 lbs.

Timney Trigger Remington REM 700 Right Hand Nickel Plated with ULA Safety NZ$300 (incl. GST)

Model # 512

The 512 comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. The Model 512 will bring a whole new realm of accuracy to your Remington rifle. Each trigger is geometrically identical with tolerances less than .0005”. adjustable from 1.5 to 4 lbs.

Timney Trigger Remington REM 700 Left Hand Nickel Plated with ULA Safety NZ$300 (incl. GST)

Model # 516

The 516 comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. The Model 516 will bring a whole new realm of accuracy to your Remington rifle. Each trigger is geometrically identical with tolerances less than .0005”. adjustable from 1.5 to 4 lbs.

Timney Trigger Remington 700 Straight Trigger with Safety NZ$280 (incl. GST)

Model # 517

The Timney Remington 700 Straight Trigger offers the most trouble-free installation imaginable with no screws, drilling, or tapping required. By simply removing existing pins, replacing trigger, and inserting new pins anyone can replace a trigger on a Remington 700. The Straight Trigger features a Timney designed safety that blocks the trigger not the sear, which is standard on all Timney Remington 700 replacement triggers.

Timney Trigger Remington 700 Straight Trigger Left Hand with Safety NZ$280 (incl. GST)

Model # 518

The Timney Remington 700 Straight Trigger offers the most trouble-free installation imaginable with no screws, drilling, or tapping required. By simply removing existing pins, replacing trigger, and inserting new pins anyone can replace a trigger on a Remington 700. The Straight Trigger features a Timney designed safety that blocks the trigger not the sear, which is standard on all Timney Remington 700 replacement triggers.

Timney Trigger Remington 700 Straight Trigger Nickel Plated with Safety NZ$300 (incl. GST)

Model # 517-16

The Timney Remington 700 Straight Trigger offers the most trouble-free installation imaginable with no screws, drilling, or tapping required. By simply removing existing pins, replacing trigger, and inserting new pins anyone can replace a trigger on a Remington 700. The Straight Trigger features a Timney designed safety that blocks the trigger not the sear, which is standard on all Timney Remington 700 replacement triggers.

Timney Trigger Remington 700 Straight Trigger Left Hand Nickel Plated with Safety NZ$300 (incl. GST)

Model # 518-16

The Timney Remington 700 Straight Trigger offers the most trouble-free installation imaginable with no screws, drilling, or tapping required. By simply removing existing pins, replacing trigger, and inserting new pins anyone can replace a trigger on a Remington 700. The Straight Trigger features a Timney designed safety that blocks the trigger not the sear, which is standard on all Timney Remington 700 replacement triggers.

Timney Trigger Calvin Elite Remington Model 700 with Safety NZ$418 (incl. GST)

Model # 520-CE

For the discriminating shooter, demanding the utmost performance from their trigger, Timney has created a new line of triggers designed to be robust and yet delicate enough to be set with a pull weight as low as 8 ounces. An engineering accomplishment, the Calvin Elite series of Timney Triggers feature wear components that are made from A2 tool steel, heat-treated to Rockwell 58 and Teflon-nickel coatings. Sears are wire EDM cut and triggers are CNC machine using state-of-the-art robotics. The lightweight 6061-T6 aluminum housings are CNC machined and anodized Timney Elite Gold.