All prices are in New Zealand Dollars with 15% GST included.
Overseas customers are not liable for GST, divide NZ$ by 1.15 and then use the below Currency Converter:



 
 
Shooting Sundries 

 

  Page 1 Page 2
Chronographs Roaring Horn
Hammer Extensions Bore Guides & Bore Snakes
Tipton Gun Vise Laser Bore Sighters
Mad Dog Claw Grip    
Ammo Boxes    

 

 


 

Trophy Roaring Horn
     
Trophy Roaring Horn - Large NZ$47 (incl. GST)
Quantity:

This Roaring Horn is injection moulded from a blend of polymers to produce a long reverberation and a natural sounding throaty Roar to fool even the wisest of red deer.

Features:
* Gain the advantage use a Trophy Roaring Horn.
* This is a must for successful hunting this roaring season.
* Just blow and roar like the real thing.
* Designed and made in New Zealand for kiwi hunters.
* Realistic loud roar.
* Hard wearing plastic, light weight, and simple to use.
* Lanyard included.
* Kiwi made.
* Proven by hunters.

 




 

Bore Guides and Bore Snakes
Bore Guides should be used when cleaning a Bolt Action Rifle.
Bore Guides protect the bore throat and keep cleaning solvent from getting into the trigger mechanism.
Pro-Shot Bore Guides
Pro-Shot "The Stopper" Adjustable Bore Guide - 22 Cal to 30 Cal NZ$97 (incl. GST)
Calibers: Quantity:

* The "Stopper" Bore Guide prevents solvent and fouling from running back into the action. Adjusts to fit action lengths precisely.
* Fits Short and Long Actions.
Fits .22 Centrefire - .30 Cal.

Bore guides should be used when cleaning a Bolt Action Rifle.  Bore guides protect the bore throat and keep cleaning solvent from entering the trigger mechanism.  The Pro-Shot bore guides are made from aircraft grade anodized aluminum.  The bore guide tips and ends are manufactured using the chemical resistant Delrin.  The anodized aluminum sleeve holds the brass pin and will not work loose like other bore guides that use plastic parts.  The following charts list applicable firearms.

Fits: Remington 700-40X-78-72-722-725-788 XP-100 Model 7 600-660, Ruger All Model 77 Winchester 70-54-56, Savage 110-112V, Mauser 98, Enfield 1917, Hart, Stolle, Kimber 89, Browning A Bolt, Dakota (.22 Centerfire - .25 Caliber/.26-.30 Cal.-Tips and Ends with solvent port ends for both sets)

 

   
Pro-Shot "The Stopper" Adjustable Bore Guide - .26 Cal to .30 Cal NZ$97 (incl. GST)
Calibers: Quantity:

* The "Stopper" Bore Guide prevents solvent and fouling from running back into the action. Adjusts to fit action lengths precisely.
*Fits .26 Centrefire - .30 Cal.Fits Short and Long Actions


Bore guides should be used when cleaning a Bolt Action Rifle.  Bore guides protect the bore throat and keep cleaning solvent from entering the trigger mechanism.  The Pro-Shot bore guides are made from aircraft grade anodized aluminum.  The bore guide tips and ends are manufactured using the chemical resistant Delrin.  The anodized aluminum sleeve holds the brass pin and will not work loose like other bore guides that use plastic parts.  The following charts list applicable firearms.

Fits: Sako Large Action A3-A4-L61, Finnbear, Weatherby, Vanguard, Browning L-70

 


     
MTM Case-Gard Bore Guides
MTM Case-Gard Bore Guide for Short Action .17 to .243 (6mm) Calibers - BGR-S-40 NZ$21 (incl. GST)
Calibers: Quantity:

Specifications:
Model # BGR-S-40
Colour:
Black
For Calibers:
.17 to .243 (6mm) Calibers.
Designed to Fit the Following Bolt Action Rifles Makes and Models:
* Remington 700, 788, 40X short actions;
* Mauser 300, Ruger 77 short actions;
* And similar bolt sizes.

Features:
* Assures perfect alignment of a cleaning rod to the bore.
* Prevents solvent contamination of magazine and trigger mechanism.
* Protects a rifle's finish.
* If you're serious about cleaning your rifles these are a must.
* Made in USA.

 

     
MTM Case-Gard Bore Guide for Short Action .25 to .378 WBY Mag. Calibers - BGR-L-40 NZ$21 (incl. GST)
Calibers: Quantity:

Specifications:
Model # BGR-L-40
Colour:
Black
For Calibers:
.25 to .378 WBY Mag. Calibers.
Designed to Fit the Following Bolt Action Rifles Makes and Models:
* Remington 700, 788, 40X short actions;
* Ruger 77 short actions;
* And similar bolt sizes.

Features:
* Assures perfect alignment of a cleaning rod to the bore.
* Prevents solvent contamination of magazine and trigger mechanism.
* Protects a rifle's finish.
* If you're serious about cleaning your rifles these are a must.
* Made in USA.

 

     
MTM Case-Gard Bore Guide for Long Action .17 to .243 (6mm) Calibers - BGW-S-40 NZ$21 (incl. GST)
Calibers: Quantity:

Specifications:
Model # BGW-S-40
Colour:
Black
For Calibers:
.17 to .243 (6mm) Calibers.
Designed to Fit the Following Bolt Action Rifles Makes and Models:
* Remington 700, 788 long actions;
* Winchester 70 short actions;
* Savage 110, Weatherby Mark V long actions and Vanguard actions;
* Ruger 77 long actions
.
Features:
* Assures perfect alignment of a cleaning rod to the bore.
* Prevents solvent contamination of magazine and trigger mechanism.
* Protects a rifle's finish.
* If you're serious about cleaning your rifles these are a must.
* Made in USA.

 

     
MTM Case-Gard Bore Guide for Long Action .25 to .378 WBY Mag. Calibers - BGW-L-40 NZ$21 (incl. GST)
Calibers: Quantity:

Specifications:
Model # BGW-L-40
Colour:
Black
For Calibers:
.25 to .378 WBY Mag. Calibers.
Designed to Fit the Following Bolt Action Rifles Makes and Models:
* Remington 700, 788 long actions;
* Winchester 70 and 54 long actions;
* Ruger 77 long actions;
* Mauser 300, Weatherby Mark V long actions and Vanguard actions;
* Browning A-bolt long action standard and magnum calibers;
* Savage 110; Mossberg 3500; Sako long actions(AV);
* And other long actions.

Features:
* Assures perfect alignment of a cleaning rod to the bore.
* Prevents solvent contamination of magazine and trigger mechanism.
* Protects a rifle's finish.
* If you're serious about cleaning your rifles these are a must.
* Made in USA.

 

     
Hoppe's Bore Snakes
Hoppes Rifle Cleaner Bore Snake NZ$35 (incl. GST)
Caliber Size: Quantity:

Hoppe's BoreSnake is the fastest bore cleaner on the planet.  One pass loosens large particles, scrubs out the remaining residue with a bronze brush, then swabs it all spotless with a cleaning area 160X larger than a standard patch. Add a few drops of Hoppe's No. 9 Lubricating Oil or Hoppe's Elite and your gun's ready for storage.

* The world's quickest, three-step bore shine.
* Brass wieght on the pull cord is stamped with the size
* Patented one-piece design
* Machine washable

Caliber Sizes:
* .22 Caliber
* 6mm / .243 Caliber
* .270 / 7mm / .284 / .280 Caliber
* .308 / 30-30 / .30-06 / .300 / .303 Caliber

 
   
Hoppe's Shotgun Cleaner Bore Snake NZ$45 (incl. GST)
Caliber Size: Quantity:

Hoppe's BoreSnake is the fastest bore cleaner on the planet.  One pass loosens large particles, scrubs out the remaining residue with a bronze brush, then swabs it all spotless with a cleaning area 160X larger than a standard patch. Add a few drops of Hoppe's No. 9 Lubricating Oil or Hoppe's Elite and your gun's ready for storage.

* The world's quickest, three-step bore shine.
* Brass wieght on the pull cord is stamped with the size
* Patented one-piece design
* Machine washable

Caliber Sizes:
*
12gauge
* 20gauge

 

 

Laser Bore Sighters
 
Bushnell Bore Sighter

Bushnell .22 to .50 Caliber Laser Bore Sighter NZ$110 (incl. GST)

Quantity:
* For handguns, rifles and shotguns
* Includes arbors for .22-.50 caliber firearms
* Also includes arbos for 20 and 12 gauge shotguns
* Easy to use
* Spend less time sighting and more time in the field!

Its bright, battery-powered laser makes rapid, ultra-precise work of boresighting. Created to meet the demands of gunsmiths and serious shooters, it includes arbors for .22- through .50-caliber firearms.

 
 
Nikko Stirling Bore Sighter

Nikko Stirling Nighteater - Bore Sighter / Shot Saver NZ$110 (incl. GST)
Scope Alignment Device

Quantity:
* With 16 attachments to sight in calibres .17 to 12ga!
* All packaged into one ABS plastic case.
* One kit to sight in everything in your gun safe.
* Attach your sighting device to the firearm muzzle and line up the crosshairs with the grid lines.

Suitable calibres:
. 177, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50, 20-12.

 



 

                

Copyright © 1998-2023 Hunting and Outdoor Supplies.  All Rights Reserved.
Updated March 2024