|
Dem-Bart No. 1 Replacement Cutters |
Dem-Bart No. 1 Fine Cutter NZ$15 (incl. GST)
Temporarily Out of Stock on All Dem-Bart!
Dem-Bart No. 1 Coarse Cutter NZ$15 (incl. GST)
Temporarily Out of Stock on All Dem-Bart!
Used for making the original layout or pattern and to deepen the rows after they are marked in with the spacing tools described below. It is "V" shaped with teeth on both sides or the "V". |
|
|
| |
|
|
Dem-Bart No. 2 Replacement Cutters |
Dem-Bart No. 2 Cutter NZ$15 (incl. GST)
* Sizes: 16, 18, 20, 22, 24, 28 and 32
Temporarily Out of Stock on All Dem-Bart!
Used for marking the rows and for deepening the rows after they are marked. One blade follows a guide line while the other blade marks the row. Then this tool is moved to the next row it deepens it and again marks the next row. This tool is a combination spacer and deepening tool. Both blades are cutters. |
|
|
| |
|
|
Dem-Bart No. 3 Replacement Cutters |
Dem-Bart No. 3 Cutter NZ$15 (incl. GST)
* Sizes: 16, 18, 20, 22 and 24
Temporarily Out of Stock on All Dem-Bart!
A left hand spacing tool which has two blades. The right hand blade does not have teeth, instead it is sharp and smooth and will follow a fine guide line. The left hand blade has teeth and cuts the new row as the checkering progresses from the right to the left. Due to the sharp narrow guide blade it is possible to produce very straight rows and consequently exceedingly precise checkering. |
|
|
| |
|
|
Dem-Bart No. 4 Replacement Cutters |
Dem-Bart No. 4 Cutter NZ$15 (incl. GST)
* Sizes: 16, 18, 20, 22 and 24
Temporarily Out of Stock on All Dem-Bart!
Identical to No. 3, except that the right hand blade is the cutting blade.
|
|
|
| |
|
|
Dem-Bart No. B Replacement Cutters |
A wide bordering tool which is used to put the final boarder around the layout or pattern.
Dem-Bart No. B-1 - Wide Cutter NZ$15 (incl. GST)
Temporarily Out of Stock on All Dem-Bart!
A narrow bordering tool which is used to put the final boarder around the layout or pattern.
Dem-Bart No. B-2 - Narrow Cutter NZ$15 (incl. GST)
Temporarily Out of Stock on All Dem-Bart!
|
|
|
| |
|
|
Dem-Bart No. S-1 Replacement Cutters and Tools |
Dem-Bart No. S-1 Cutter NZ$15 (incl. GST)
Temporarily Out of Stock on All Dem-Bart!
|
|
Dem-Bart No. S-1 Tool NZ$26 (incl. GST)
* For tight corners
Temporarily Out of Stock on All Dem-Bart!
|
| |
|
|
Dem-Bart Skip Line Replacement Cutters |
Skip Line Cutter - Left Hand NZ$18 (incl. GST)
* Sizes: L9, L10, L11 and L12
Temporarily Out of Stock on All Dem-Bart!
Dem-Bart Skip Line Cutter - Right Hand NZ$18 (incl. GST)
* Sizes: R9, R10, R11 and R12
Temporarily Out of Stock on All Dem-Bart!
|
|
|
| |
|
|
Dem-Bart Triple Line Replacement Cutters |
Dem-Bart Triple Line Cutter NZ$18 (incl. GST)
* Sizes: T16, T18, T22, T24 and T26
Temporarily Out of Stock on All Dem-Bart!
Used after pattern layout to let down or deepen the diamonds prior to final polish. This cutter has an equalizing effect on the lines per inch to assure an even pattern. |
|
|
